Support Remote Management and Upgrade Industrial 5G Router

Product Features
Wi-Fi6 (IEEE 802.11ax) Standard
802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience.
Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling router to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac.
Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM).
Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency.
Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference.
Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life.

Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO)
Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios.

High-Speed Access
Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps.

5GHz Priority
The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience.

About this project
CPE Industrial 5G Cellular Router features: Support 3G/4G/5G and wired WAN dual link backup. Multiple WAN connection modes, including static IP, DHCP, PPPOE, 3G/UMTS/4G/LTE, DHCP-4G/5G. Support WIFI, compatible with 802.11b/g/n/ac, AP/AP Client/Bridge mode. The VPN tunnel: the PPTP L2TP/OPENVPN/IPSEC/GRE
Industrial 5G routers feature high-speed 5G networks and Wi-Fi. High performance industrial-grade CPU, provides high-speed 5G network, and backward compatibility with 4G network, wide coverage. Provides 2* gigabit RJ45 Ethernet interface, 4* cellular antenna, 4*WiFi antenna.
The 5G modem is always online. Support RS232/RS485, SIM/UIM card slot, Ethernet interface. Multiple protection mechanisms to ensure system stability and automatic recovery mechanisms, including online detection and automatic dialing. Watchdog design to ensure system stability.
The 5G wifi6 router uses industrial-grade materials. High performance industrial CPU and wireless communication module. It is widely used in machine-to-machine fields, such as industry self-service terminals, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environmental protection, postal service, meteorology, etc.
5G modems can be used globally. Working frequency: 5 g NR: n1 n2 / n3 / n5 / n7 / n8 / n12 / n20 / n25 n28 / n38 / n40 / n41 / n48 * / n66 n71 / n77 / n78 n79 LTE FDD: B1 / B2 / B3 / B4, B5 / B7 / B8 / B12 / bl3 / B14 / B17 / B18 / B19 / B20 / B25 / B26 B28 / b-29 / B32 / B66 / B71 LTE TDD: B34 B38 / B39 / B40 / B41 / B42 / B43 / B48.