What determines the router's ability to penetrate walls?

WiFi wireless network is believed to be necessary in most families. WiFi is connected and used immediately, which is very convenient. However, due to the lack of awesome in router equipment and other reasons, the use of WiFi network is not as good as ever, and problems such as poor signal and network disconnection often occur. A more common phenomenon is that routers placed in bedrooms with several walls separated from the living room cannot receive WiFi signals. From this, it can be seen that the wall piercing ability of most routers is still quite poor nowadays. 4G Outdoor CPE

So why is the ability of routers to penetrate walls generally weak? The first point is the issue of transmission power. The higher the wireless transmission power of a router, the better its ability to penetrate the wall. However, it is important to note that if the transmission power of a Wireless Router exceeds 100mW, the electromagnetic radiation it releases may cause harm to the human body. Therefore, the country also stipulates that the transmission power of wireless routing products cannot exceed this value. Therefore, in the current market, The difference in transmission power between routers is also small, so when selecting routers, this difference is hardly considered. Wifi 5 Outdoor Wireless Ap
Another issue is the frequency of WiFi signals. The 2.4G frequency band is still the mainstream frequency band for various routing devices at present. Compared with the 5G frequency band, the 2.4G frequency band has a stronger ability to penetrate walls, but at the same time, the 5G frequency band also has the advantage of faster speed and less interference. Due to the interference signals generated by various appliances such as microwaves at home being in the 2.4G frequency band, if the router can only support the 2.4G frequency band, it is easily affected by the appliances. If the router can support both frequency bands, it is a perfect solution to this problem. Therefore, dual frequency router products may be the best choice. Wifi 6 Outdoor Wireless Ap

Signal amplifier refers to an electronic component inside a router. Nowadays, router products are also equipped with signal amplifiers, including PA power amplifiers, LNA low noise amplifiers, and FEM signal amplification modules, which are divided into two types: built-in integrated and external independent. However, the effect of external independent signal amplifiers is better.
The key point is, what kind of router product can meet the various needs mentioned above? I personally recommend 360 whole house routing. Firstly, this is a mesh distributed router that combines multiple devices to form a network and can bypass thick walls that are difficult to penetrate. Secondly, in terms of wall penetration capability, 360 Home Router supports the 2.4G+5G dual frequency band, making it a true dual frequency router with strong wall penetration capability, as well as 5G high-speed and anti-interference capabilities. Furthermore, in terms of signal amplifiers, each mother route of the 360 whole house route has four external independent signal amplifiers, which are excellent in terms of individual signals and can perfectly achieve full house coverage.

The most important thing is that 360 full house routing adopts advanced Qualcomm Mesh distributed technology, which is a true Mesh distributed routing. This also means that 360 whole house routing adopts intelligent networking, where multiple nodes are interconnected and interconnected, and if one node fails, it can seamlessly connect to another intact node. This perfectly avoids wall problems and achieves full house coverage. Whether it's a narrow or multi wall apartment, 360 whole house routing will be perfect and you deserve it!