Product - ComFi W500 11AX 3000M Outdoor 5G Wireless CPE Product Specifications V1.0

ComFi W500 is an outdoor 2x2 dual-band WiFi6 wireless AP, suitable for outdoor areas that require wireless coverage such as scenic spots, parks, schools, and squares. ComFi W500 supports 2x2 11ax, and the maximum concurrent connection rate of dual-band can reach up to 3000Mbps, which can build a stable and high-speed wireless network for users. ComFi W500 has high-performance wireless indicators, can get a larger wireless coverage area and better wall penetration performance. ComFi W500 supports the access of up to hundreds of wireless terminals to meet the application scenarios of high-density wireless terminals. At the same time, ComFi W500 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to easily connect. ComFi W500 supports standard 48V PoE power supply and pole installation, and the installation and configuration are flexible and convenient. Users only need to spend a short time to complete the settings, you can enjoy the fun of surfing the Internet. Product Features 5G Cellular Network Support 5G NR mobile operator’s networks. It is compatible with 5G networks of major operators in the market and backward compatible with 4G LTE and 3G WCDMA networks. Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling AP to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. WiFi 6 Outdoor Wireless Ap High-level Protection It adopts metal shell and overall heat dissipation design, suitable for wide temperature operation of -30°C to +65°C and adopts IP67 waterproof and dustproof design. Ethernet interface supports 6KA/6KV enhanced lightning protection, fully meet the requirements of industrial-grade use; Reinforced with metal fasteners and cable connectors to ensure connection fastening performance and equipment working stability; outdoor CPE External Indicator The external high-bright status indicator light makes the equipment running status clear at a glance, saving troubleshooting time. 5G outdoor CPE

Download

Product - ComFi W2140 Outdoor 4G Wireless CPE Product Specifications V1.0

High Performance Outdoor 4G Wireless CPE Pole Installation for outdoor application. Support 2.4GHz 2x2 WI-FI, IEEE 802.11b/g/n Wi-Fi standard, up to 300Mbps data rate. Support 4G LTE cellular network, multiple common LTE-FDD and LTE-TDD bands support with LTE Cat4 technology, up to 150Mbps data rate. 1 x RJ45 10/100Mbps Fast Ethernet Network Port, IP68 Waterproof, Support 24V PoE 2 x Type-N Antenna Connector for 2.4 GHz WI-Fi radio. 2 x Type-N Antenna Connector for 4G LTE cellular radio.

Download

Product - ComFi W2100 Outdoor Wireless AP Product Specifications V1.0

2.4GHz Wi-Fi Radio, IEEE 802.11n, 2T2R IP65 Grade Outdoor Enclosure, Dustproof and Waterproof External 6dBi Omni-Directional Antenna Higher Wi-Fi Power, coverage 100 Meter Radius Power by PoE Power or Standard DC 12V Power 300Mbps Wi-Fi Data Rate and Support 32+ Users

Download

Product - ComIoT 23 4G to USB Module Product Specifications V1.0

Com IoT23 series is a 4G industrial core module developed, designed and produced by Shenzhen Movingcomm Technology Co., Ltd. It is a highly integrated small 4G cat4 LTE module. Supporting a maximum downlink rate of 150 Mbps and a maximum uplink rate of 50 Mbps. It has good cost in performance. In addition, it is compatible with multi-network standards LTE and UMTS/HSPA+ and support seamless switching between 4G and 3G networks. This modem in the module is based on the ASR chipset solution. It has rich network protocols, supports multiple drivers, and the USB drivers are suitable for Windows, Linux, Android and other operating systems. It is widely used in the Internet of Things fields such as equipment networking, unmanned self-service equipment, industrial routers, and Raspberry Pi applications. The sim card slot supports NANO SIM and featured with anti-wrong way insertion self-bouncing card slot, better quality and higher durability. Com IoT23 series supports multiple Quectel module series: EC200T series, EC200S series, EC200A series and EC20 series, which can satisfy the frequency band coverage of different countries and regions. Product Features LTE Cat 4 module optimized for M2M and IoT applications Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage MIMO technology meeting demands for data rate and link router core board reliability in modem wireless communication systems 2.4G router module Super cost-effective wireless router module

Download

Product - ComIoT 04 Wireless Router Core Module Product Specifications V1.3

The ComIoT 04 module is a wireless router core module developed and produced by Shenzhen Movingcomm Technology Co., Ltd. It is a highly integrated small 802.11 b/g/n Wi-Fi gateway module. The module integrated with Wi-Fi function, Ethernet interface, Serial interface, USB and router system in a low-cost form factor. It only needs a few simple external circuits to perfectly apply and operate the module. wireless router module The ComIoT 04 2.4G router module is based on Qualcomm QCA9531 chipset. It is integrated 802.11n 2x2 MAC/BB/radio with internal PA and LNA. It also supports 802.11n, 20 MHz and 40 MHz channels up to 144 Mbps and 300 Mbps respectively, as well as compatible with IEEE 802.11b/g wireless protocols and data rates. The module adopts the OpenWRT operating system. It can support AP mode and client mode at the same time. It contains various application software packages that could reduce customer’s time and efforts for a product development. router core board

Download

Product - ComFi W5850 Outdoor 11AX 3000M Dual Band Wireless AP Product Specifications V1.1

ComFi W5850 is an outdoor 2x2 dual-band WiFi6 wireless AP, suitable for outdoor areas that require wireless coverage such as scenic spots, parks, schools, and squares. ComFi W5850 supports 2x2 11ax, and the maximum concurrent connection rate of dual-band can reach up to 3000Mbps, which can build a stable and high-speed wireless network for users. ComFi W5850 has high-performance wireless indicators, can get a larger wireless coverage area and better wall penetration performance. ComFi W5850 supports the access of up to hundreds of wireless terminals to meet the application scenarios of high-density wireless terminals. At the same time, ComFi W5850 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to easily connect. ComFi W5850 supports standard 48V PoE power supply and pole installation, and the installation and configuration are flexible and convenient. Users only need to spend a short time to complete the settings, you can enjoy the fun of surfing the Internet. Product Features 5G Cellular Network Support 5G NR mobile operator’s networks. It is compatible with 5G networks of major operators in the market and backward compatible with 4G LTE and 3G WCDMA networks. Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling AP to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. High-level Protection It adopts metal shell and overall heat dissipation design, suitable for wide temperature operation of -30°C to +65°C and adopts IP68 waterproof and dustproof design. Ethernet interface supports 5G outdoor CPE 6KA/6KV enhanced lightning protection, fully meet the requirements of industrial-grade use; Reinforced with metal fasteners and cable connectors to ensure connection fastening performance and equipment working stability; Outdoor Access Point External Indicator The external high-bright status indicator light makes the equipment running status clear at a glance, saving troubleshooting time. WiFi 6 Outdoor Wireless Ap

Download

Product - ComFi I5800 Industrial Grade 5G WIFI6 Wireless Router Product Specifications V1.0

ComIn I5800 is an industrial grade 5G WIFI6 dual-band wireless router, that integrates multiple functions such as new 5G cellular broadband Internet access, high speed WIFI transmission, serial port pass-thru transmission, and backend remote management. It is based on Qualcomm IPQ5018 chipset solution with 2x2 802.11ax that support data transfer rate up to 3000Mbps and enable to build a stable high-speed wireless network. In addition, ComIn I5800 has high-performance wireless characteristics, which can obtain larger wireless coverage area and better wall penetration performance. ComIn I5800 supports the wireless access of up to hundreds of wireless terminals that satisfy with the application scenario requirements of high-density wireless terminals. At the same time, ComIn I5800 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to connect conveniently. It provides more processing performance, richer interfaces and higher network connection speed than ordinary industrial routers. This product is suitable for different application scenarios, such as vehicle WIFI, video transmission, PLC remote control, intelligent express cabinet, video surveillance, 5G coverage, etc. Product Features Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling router to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. Industrial Design Based on Qualcomm IPQ5018 Chipset Solution Wide voltage input design: 12 ~ 18V Industrial grade software and hardware watchdog design, trouble free and reliable operation in power station, transportation, and industrial control environment application Industrial grade EMC electromagnetic compatibility and radiation performance, passed the GB/T17626.5-2008 Level 4 test standard Industrial grade components, working temperature: -40 ~ +55°C Industrial enclosure, suitable for extreme environments Fan-less heat dissipation technology effectively reduces the failure rate of the equipment SIM card protection design Meet the trouble-free and reliable operation under vibration and shock environment Rugged, Stable and Reliable Apply complete anti-disconnection mechanism that to ensure the end data terminal is always online The product passed EMC test requirements The Ethernet interface built-in 1.5KV electromagnetic isolation protection GB/T17626.5-2008 (Level 4) SIM/UIM interface built-in 1.5KV ESD protection GB/T17626.5-2008 (Level 4) Built-in reserve phase protection and overvoltage protection for the power interface High Speed Cellular Network Support 5G SA (Standalone) and NSA (Non-Standalone) network Backward compatible with 4G Cat18(UL)/Cat20(DL) or Cat12(UL)/Cat13(DL)* Support Band Lock, Base Station Lock 5G Industrial Router Support SIM PIN Code Lock IOT gateway Support Network Mode Lock industrial router

Download

Product - ComIn I3500 Industrial Grade 5G Wireless Router Product Specifications V1.8

ComIn I3500 is an industrial 5G wireless router that integrates multiple functions such as WIFI transmission, local resource sharing, cellular mobile Internet access, precise GPS positioning, serial port pass-thru transmission, and backend remote management. It provides more processing performance, richer interfaces and higher network connection speed than ordinary industrial routers. This product is suitable for different application types and scenarios, such as car WIFI, video transmission, PLC remote control, smart express cabinet, video surveillance, 5G access application etc. Product Features Dual-core processor, faster and more powerful processing speed Support 5G Network Access Industrial grade design, support use in high and cold temperature Full Metal enclosure, higher safety index, better corrosion resistance Gigabit Network Port Design for faster link communication Support network port function definition and customization Support Wi-Fi 802.11b/g/n/ac up to 1200Mbps max. data speed Maximum Wi-Fi user connection exceeds 60+ Wide Power Voltage Design Linkable to an external serial device USB2.0 high-speed interface port Optional dedicated precise GPS positioning (optional) Optional High Capacity Storage via SATA Hard-disk expansion Hardware watchdog design prevents downtime and auto-recovery Main Features – Industrial Application Design Adopt high-performance 32-bit dual-core network processor Wide voltage input design: 9 ~ 28V Industrial grade software and hardware watchdog design, trouble-free and reliable operation in power station, transportation, and industrial control environment application Excellent electromagnetic, radiation, and static protection ability Industrial grade EMC electromagnetic compatibility and radiation performance, passed the GB/T17626.5-2008 Level 4 test standard Industrial grade components, working temperature: -20 ~ +70°C Industrial enclosure, suitable for extreme environments Fan-less heat dissipation technology effectively reduces the failure rate of the equipment SIM card protection design Meet the trouble-free and reliable operation under a vibration and shock environment Main Features – Rugged, Stable, and Reliable industrial router A dual watchdog design ensures that the stability of the system Apply a complete anti-disconnection mechanism to ensure the end data terminal is always online The product passed EMC test requirements IOT gateway The Ethernet interface built-in 1.5KV electromagnetic isolation protection GB/T17626.5-2008 (Level 4) SIM/UIM interface built-in 1.5KV ESD protection GB/T17626.5-2008 (Level 4) Built-in reserve phase protection and overvoltage protection for the power interface 5G Industrial Router

Download

Product - ComIn I3000 Industrial Grade 4G Wireless Router Product Specifications V1.8

Product Description ComIn I3000 is an industrial 4G wireless router that integrates multiple functions such as WIFI transmission, local resource sharing, cellular mobile Internet access, precise GPS positioning, serial port pass-thru transmission, and backend remote management. It provides more processing performance, richer interfaces and higher network connection speed than ordinary industrial routers. This product is suitable for different application types and scenarios, such as car WIFI, video transmission, PLC remote control, smart express cabinet, video surveillance, etc. IOT gateway Product Features Dual-core processor, faster and more powerful processing speed 4G LTE modem Cat4, can be customized to Cat6 modem Industrial grade design, support use in high and cold temperature Full Metal enclosure, higher safety index, better corrosion resistance Gigabit Network Port Design for faster link communication Support network port function definition and customization Support Wi-Fi 802.11b/g/n/ac up to 1200Mbps max. data speed Maximum Wi-Fi user connection exceeds 60+ Wide Power Voltage Design Linkable to external serial device USB3.0 high speed interface port Optional dedicated precise GPS positioning (optional) Hardware watchdog design prevents downtime and auto-recovery 4G industrial router

Download

Product - ComIn I2200 Industrial Grade 4G Wireless Router Product Specifications V1.0

In the world of the internet of things, everything is interconnected. The demand for intelligent communication will become higher and higher, especially in the field of intelligent industrial control. The ComIn I2200 4G industrial router is a new generation of 4G wireless VPN router launched by Shenzhen Movingcomm Technology Co., Ltd. for the industrial field. The device provides fast Internet access with the explosive growth of 4G cellular data network and a variety of wired high-speed broadband access services. In addition, ComIn I2200 provides 5 x 100Mbps RJ45 network ports (one of which can be multiplexed with WAN/LAN, four LAN ports), a set of industrial phoenix terminals (serial port, GPIO, and DC power supply), and a drawer SIM/UIM card slot. It can have the serial port, Ethernet port and WIFI connected and working at the same time, providing pass-through data transmission and GPIO control functions. ComIn i2200 supports remote management via the cloud management platform. It has a simple graphical interface, is convenient and quick to use. It lets you know the current status of equipment anytime, anywhere, widely used in M2M industries and the Internet of Things, such as smart grid, smart transportation, smart home, finance, Mobile POS terminal, supply chain automation, industrial automation, intelligent building, fire protection, public safety, environmental protection, meteorology, digital medical treatment, telemetry, military, space exploration, agriculture, forestry, water, coal mine, petrochemical, and other fields. Features Ruggedized Industrial Design ComIn I2200 adopts stable performance industrial-grade 32-bit MIPS processor, with enterprise-level data communication processing capability, built-in 128MB system memory, WIFI supports 2.4GHz 802.11n protocol and provides a maximum rate of up to 300Mbps. In addition, the product adopts the metal casing to provide isolation protection, which is especially suitable for industrial control field applications. The wide voltage input design is 6~36VDC, the standard 12VDC power input, and the built-in power reverse protection.industrial router Stability and Robustness ComIn I2200 adopts dual watchdog design to ensure the stability of the device and support long-term operation. It can keep long operation hours without human interference. The system has a failsafe mechanism to take care of the WAN/Cellular connection, improving uplink time and preventing loss in communication. All the Ethernet ports have built-in 1.5KV magnetic isolation protection and the SIM holder has built-in 15KV ESD protection, the power Input has reverse-voltage and surge protection as well as lightning protection (optional) in the antenna connectors.Vehicle Router User Friendliness ComIn I2200 provides standard RS232/RS485, Ethernet and WIFI interfaces, which can directly connect serial devices, Ethernet devices and WIFI devices. The standard wired WAN port supports PPPoE protocol and can be directly connected to ADSL equipment. The device is an intelligent data terminal, which can enter the data transmission state when it is powered on. It supports a powerful cloud management platform, which is convenient for multi-device management (optional). It is easy to use and flexible. It supports multiple working modes and is convenient for system configuration. and maintenance (including local, remote web, and cloud platform management).4G industrial router

Download

Product - ComIn I2000 Industrial Grade 4G Wireless Router Product Specifications V1.5

ComIn I2000 is an industrial grade, compact, ruggedized cellular enabled 4G wireless router for high speed wireless communication of machines to machines (M2M) in modern era. It allows local and remote access to the connected machines virtually anywhere. It is available with flexible choice of cellular modem, Wi-Fi, Ethernet, and Serial interconnectivity options. Furthermore, it is loaded with factory product firmware for general applications and it can alternatively support open source OpenWRT by your own custom built and a product development for a project. Features Ruggedized Industrial Design ComIn I2000 is a performance 4G wireless router based on industrial grade 32bit MIPS network processor with 128MB system RAM configuration, 1 WAN, 1 LAN, WIFI 2.4GHz and 4G Cellular modem. The LAN interface can be upgraded and changed to Serial Interface RS232 option. In addition, it supports several operation mode such as idle mode, hibernate mode, timer mode (optional) for power saving. The ComIn I2000 router has IP30 rating metal enclosure and wide power input range from 6~40VDC with reverse-voltage protection.4G industrial router Stability and Robustness ComIn I2000 has hardware watchdog on board to maintain the stability of the device. It can keep long operation hours without human interference. The system has failsafe mechanism to take care of the WAN/Cellular connection, improving uplink time and preventing lost in communication. All the Ethernet ports have built-in 1.5KV magnetic isolation protection and the SIM holder has built in 15KV ESD protection, the power Input has reverse-voltage and surge protection as well as lightning protection (optional) in the antenna connectors.industrial router User Friendliness ComIn I2000 supports local/Remote Web configuration. Optional Cloud management service solution is available for scalable device management. The product has a friendly web user interface and simple maintenance routine.IOT gateway

Download

Product - ComIn I2100 Industrial Grade 4G Wireless Router Product Specifications V1.5

In a networked world where everything is connected, the demand for smart communication will become much and much stronger, especially in the field of smart industrial application and control. The ComIn I2100 4G router is also a new generation 4G wireless VPN router launched by Shenzhen Movingcomm Technology Co., Ltd. for industrial level application. The device provides fast Internet access by virtue of the explosive growth of 4G cellular data network and a variety of high-speed networked broadband access services. With its security, stability and intelligence performance, thousands of devices can be easily networked, providing high-speed data transmission and communication for the true meaning of Internet of Things. The ComIn I2100 also provides an Ethernet WAN/LAN multiplexing RJ45 network port, an Ethernet LAN RJ45 network port, a set of industrial Phoenix terminal blocks (serial function and power supply function), a drawer type SIM/USIM card slot, which can have the serial port, Ethernet port, and Wi-Fi connected at the same time for enabling pass-through transmission. The ComIn I2100 supports remote management via a cloud platform. The cloud platform has a simple graphical interface that can be quick to use. It can let you know the current status of the device anytime and anywhere. Such application is widely used in the M2M industry and the Internet of Things industry chain, such as smart grid, smart transportation, smart home, finance, Mobile POS terminals, supply chain automation, industrial automation, smart buildings, fire protection, public safety, environmental protection, meteorology, digital medical care, remote sensing surveys, military, area exploration, agriculture, forestry, water affairs, coal mines, petrochemicals and other industrial fields.

Download